Home » artigos » Congressos, cursos e feiras no exterior

Congressos, cursos e feiras no exterior

Publicado em 10/12/2018

Objetivando a busca constante por novas tecnologias, a Damasco Penna procura estar presente em cursos, congressos e feiras relacionadas à engenharia geotécnica.

 

Acreditamos que estarmos presentes nesses eventos garante que nos mantenhamos atualizados com o que existe de mais moderno em relação às ferramentas de investigação geotécnica, softwares de processamento de dados geotécnicos além de estreitar relacionamento com fornecedores e parceiros de outros países.

 

A seguir, listamos alguns dos eventos em que estivemos nos últimos anos:

 

ISC’98 – First International Conference on Geotechnical Site Characterization – Atlanta – GA – USA – Abril de 1998.

 

Flat Dilatometer Test – Georgia Institute of Technology – Atlanta – Georgia – U.S.A. – 1998 – Prof. Dr. Silvano Marchetti

 

8th International Conference “Design & Construction of Deep Foundations”  – New York, N.Y. – USA – Outubro de 2000.

 

12th Panamerican Conference on Soil Mechanics and Geotechnical Engineering – Junho de 2003 – Cambridge – Massachusetts – USA.

 

ISC’2 International Site Characterization – Porto – Portugal – Setembro de 2004.

 

Computer Software for Design and Analysis of Deep Foundations – MIT – Massachusetts Institute of Technology – Cambridge – U.S.A. – 2003 – Prof. Dr. Frank Townsend e Prof. Dr. William Isenhower

 

Cone Penetration Test – Universidade do Porto – Portugal – 2004 – Prof. Dr. Tom Lunne – Norwegian Geotechnical / Prof. Dr. John Powell – Building Research Establishment

 

Second International Conference on the Flat Dilatometer Test – Washington D.C. – USA – April –2006.

 

Dilatometer Test – Washington D. C. – USA – 2006 – Prof. Dr. Silvano Marchetti

 

Foundation design rules from pressuremeter tests results (PMT) – Prof. Roger Frank – 2006 – École Nationale des Ponts et Chaussées – Paris – France

 

ISC’3 International Site Characterization – Taipei – Taiwan – April – 2008.

 

Estimation of Soil Properties for Foundation Design – Taipei – Taiwan – 2008 – Prof. Dr. Fred H. Kulhawy – Cornell University.

 

Second International Symposium on Cone Penetration Testing – CPT 10 –  Huntington Beach – California – USA – Maio de 2010.

 

Mostra Internazionale “Geofluid Drilling & Foundations”– Piacenza – Itália – Outubro de 2010.

 

Foundations-  Recent Developments in Analysis and Design – Imperial College – London – 2009 – Professor John Burlan / Professor Richard Jardine / Dr. Catherine O’Sullivan.

 

Numerical Analysis in Geotechnical Engineering – Imperial College – London – 2010 – Professor David Potts / Dr. Lidija Zdravcovik / Dr. Catherine O’Sullivan.

 

Enhanced In-Situ Testing for Geotechnical Analyses and Foundation Design – Georgia Institute of Technology  – Atlanta – GA – USA – March 2011 – Professor Paul Mayne.

 

High Strain Dynamic Foundation Testing (PDA and CAPWAP) – Pile Dynamics, Inc. and GRL Engineers, Inc. – Cleveland – OH – USA – October 2011 – Professor Frank Rausche PhD. P.E. / Professor Garland Likins P.E.

 

Geotechnical Instrumentation for Field Measurements – Deltares Academy – University of Delft – Delft – The Netherlands – May, 2011 – Professor John Dunnicliff / Professor Ton Peters.

 

Mostra Internazionale “Geofluid Drilling & Foundations”– Piacenza – Itália – Outubro de 2012.

 

18th International Conference on Soil Mechanics and Geotechnical Engineering Paris – France – September 2013;

 

Standard Course on Computational Geotechnics – Prof. Denis Waterman – 2013 – Plaxis bv – Delft – The Netherlands

 

Computational Geotechnics – Plaxis bv – Schiphol – The Netherlands – January, 2014 – Professor Dennis Waterman / Professor Antonio Gens / Professor Ronald Brinkgreve.

 

3rd International Symposium on Cone Penetration Testing – CPT 14 – Las Vegas – Nevada – USA – Maio de 2014;

 

Mostra Internazionale “Geofluid Drilling & Foundations”– Piacenza – Itália – Outubro de 2014.

 

3rd International Conference on the Flat Dilatometer – DMT 15 – Rome – Italy – Junho de 2015.

 

SDMT Training course – Rome – Italy – June, 2015 – Prof. Silvano Marchetti – University of L´Aquila – Italy

 

Ingeniería de la estabilidad de taludes – Bogotá – Colômbia – Julho, 2015 – Prof. Dr. Carlos Carranza-Torres – Rocscience – University of Minnesota – USA

 

International Symposium – Design of Piles in Europe – Leuven – Belgium -Abril de 2016.

 

ISC’5 International Conference on Geotechnical and Geophisical Site Characterization – Gold Coast – Austrália – Setembro de 2016.

 

Liquefaction Analysis od Tailing Facilities – Prof. Dr. Scott M. Olson– 2016 – Associate Professor of Civil & Environmental Engineering at the University of Illinoioi

 

CPT in Geotechnical Practice – Gold Coast – Austrália – 2016 – Prof. Dr. Tom Lunne – Norwegian Geotechnical / Prof. Dr. John Powell – Building Research Establishment / Prof. Dr. Peter Robertson – Gregg Drilling & Testing, Inc – Professor Emeritus, University of Alberta, Canada.

 

Basal Reinforced Piled Embankments – Delft University of Technology – Novembro, 2016 – Profa. Dra. Suzanne van Eekelen – Delft, Netherlands

 

CPTU, Interpretation and Benefits – Universidad Privada de Santa Cruz de La Sierra – Abril de 2017 – Prof. Dr. Peter Robertson / Professor Emeritus, Geotechnical Engineering / British Columbia University.

 

Fourth International Course on Geotechnical and Structural Monitoring – Department of Earth Sciences – Sapienza University of Rome – Rome – Italy – Junho de 2017

 

Fifth International Course on Geotechnical and Structural Monitoring – Department of Earth Sciences – Sapienza University of Rome – Rome – Italy – Maio de 2018